For 1990-2009 cars only
Removal Procedure
- Remove the screws retaining the fuel filter pipe to the body.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Use jack stands in order to support the body of the vehicle.
- Release the brake line retainers closest to the first body mount (2) in order to ensure that the brake lines will not bend when you lower the frame.
- Loosen all the body mount bolts (5). Do not remove the bolts.
- Remove the bolt (5) from the body mount.
- Lower the frame slightly.
- Remove the body mount from the frame.
Installation Procedure
- Install the body mount (2) to the frame.
- Raise the frame.
- Install the bolt (5) to the body mount.
- Install the body mount bolts (5).
- Install the brake line retainers.
- Remove the safety stands.
- Lower the vehicle.
- Install the screws retaining the fuel filler pipe to the body.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the body mount bolts to 140 N·m (103 lb ft).
