Rear Seat Riser Replacement with Bench Seat

1. Remove the rear seat (1) from the vehicle. Refer to Rear Bench Seat Replacement .
2. Remove the bolts (2) that retain the seat riser to the seat cushion frame.
3. Remove the seat riser (3) from the seat cushion frame.

1. Position the seat riser to the seat cushion frame.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts (2) to retain the seat riser (3) to the seat cushion frame.

Tighten
Tighten the nuts to 55 N·m (41 lb ft).

3. Install the seat (1) into the vehicle. Refer to Rear Bench Seat Replacement .