Removal Procedure
- Remove the engine cover. Refer to
Engine Cover Replacement
.
- Remove the positive crankcase ventilation (PCV) cover screws.
- Remove the PCV cover, diaphragm, and spring.
- Clean and inspect the cover, diaphragm and spring.
- Discard the diaphragm if damage is found.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the spring, diaphragm and cover.
- Install the PCV cover screws.
Tighten
Tighten the screws to 4 N·m (35 lb in).
- Replace the engine cover. Refer to
Engine Cover Replacement
.