Tools Required

1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
3. Disconnect the electrical connector from the wiper motor.



4. Remove the 4 bolts retaining the wiper system drive module.



5. Remove the wiper drive system module from the vehicle.



6. Disconnect the drive link from the wiper motor crank arm using the J 39232 .



7. Remove the 2 bolts retaining the wiper motor.
8. Remove the wiper motor from the wiper drive system module.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the wiper motor onto the wiper drive system module with the 2 bolts.

Tighten
Tighten the bolts to 8 N·m (71 lb in).




2. Connect the drive link onto the wiper motor crank arm using the J 39529 .



3. Install the wiper drive system module on the vehicle.



4. Install the 4 bolts.

Tighten
Tighten the bolts to 8 N·m (71 lb in).




5. Connect the electrical connector to the wiper motor.
6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
7. Install the wiper arms. Refer to Windshield Wiper Arm Replacement .
8. Operate the wipers and inspect for proper operation.