GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1824611  Size: SH

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable.
  2. Relieve the fuel pressure. Refer to Fuel Pressure Relief .
  3. Raise the vehicle.
  4. Remove the fuel tank. Refer to Fuel Tank Replacement .
  5. Remove the fuel pressure sensor (1).

Installation Procedure


    Object Number: 1824611  Size: SH
  1. Install the fuel pressure sensor (1).
  2. Install the fuel tank. Refer to Fuel Tank Replacement .
  3. Refill the fuel tank.
  4. Install the fuel filler cap.
  5. Connect the negative battery cable.
  6. Inspect for leaks:
  7. 6.1. Turn ON the ignition for 2 seconds.
    6.2. Turn OFF the ignition for 10 seconds.
    6.3. Turn ON the ignition.
    6.4. Inspect for fuel leaks.