Application | Specification | |
---|---|---|
Metric | English | |
Air Cleaner Outlet Duct Clamp Screw (4.8L, 5.3L, and 6.0L) | 7 N·m | 62 lb in |
Air Cleaner Outlet Duct Wingnut (4.3L) | 3 N·m | 27 lb in |
Bypass Pipe to Water Pump Bolt (6.6L) | 21 N·m | 16 lb ft |
Charged Air Cooler Duct Clamp (6.6L) | 8 N·m | 71 lb in |
Coolant Air Bleed Pipe Stud/Bolt (4.8L, 5.3L, and 6.0L ) | 12 N·m | 106 lb in |
Coolant Heater (4.8L, 5.3L, 6.0L) | 50 N·m | 37 lb ft |
Coolant Heater Bolt (4.3L ) | 2 N·m | 18 lb in |
Coolant Heater Bolt (6.6L ) | 2 N·m | 18 lb in |
Coolant Heater Cord Bolt | 8 N·m | 71 lb in |
Coolant Outlet Pipe Clip Bolt (6.6L) | 9 N·m | 80 lb in |
Coolant Recovery Reservoir Bolt | 11 N·m | 97 lb in |
Drive Belt Tensioner Bolt | 50 N·m | 37 lb ft |
Engine Block Coolant Drain Plug (4.3L ) | 20 N·m | 15 lb ft |
Engine Coolant Heater Cord Bracket Bolt | 12 N·m | 106 lb in |
Engine Coolant Heater Cord Clip Bolt | 12 N·m | 106 lb in |
Engine Coolant Temperature Sensor | 20 N·m | 15 lb ft |
Exhaust Gas Recirculation (EGR) Coolant Pipe Bole (6.6L) | 21 N·m | 16 lb ft |
Fan and Clutch Retaining Nut to Water Pump Pulley (4.3L) | 57 N·m | 42 lb in |
Fan and Water Pump Pulley Bolt (4.3L) | 25 N·m | 18 lb ft |
Fan Clutch Bolt (4.8L, 5.3L and 6.0L) | 23 N·m | 17 lb ft |
Fan Clutch Nut (4.8L, 5.3L and 6.0L) | 56 N·m | 41 lb ft |
Fan Clutch Retaining Bolts (4.3L) | 33 N·m | 24 lb ft |
Fan Pulley Bolt/Nut (6.6L) | 46 N·m | 34 lb ft |
Fan Shroud Bolt | 9 N·m | 80 lb in |
Fuel Line to Fuel Injection Control Module Bolt (6.6L) | 35 N·m | 26 lb ft |
Heater Inlet Pipe to Fuel Filter Bolt (6.6L) | 21 N·m | 16 lb ft |
Heater Inlet Pipe to Thermostat Bolt (6.6L) | 21 N·m | 16 lb ft |
Heater Outlet Hose Bracket Bolt (6.6L) | 21 N·m | 16 lb ft |
Oil Cooler Hose Adapter Bolt (4.8L, 5.3L and 6.0L) | 12 N·m | 106 lb in |
Oil Cooler Hose Bracket Bolt (4.8L, 5.3L and 6.0L) | 25 N·m | 18 lb ft |
Oil Cooler Line Clip to Bracket Nut (4.3L) | 12 N·m | 106 lb in |
Oil Cooler Line Fittings to the Oil Filter Base (4.3L) | 17 N·m | 13 lb ft |
Oil Cooler Line Fittings to the Oil Filter Base (4.3L Auxiliary Oil Cooler) | 35 N·m | 26 lb ft |
Oil Cooler Line Fittings to the Radiator (4.3L) | 24 N·m | 18 lb ft |
Oil Level Indicator Tube and Transmission Fluid Fill Tube Lower Support Bolt (4.3L) | 4 N·m | 44 lb in |
Radiator Bolt | 25 N·m | 18 lb ft |
Surge Tank Bolt/Nut | 9 N·m | 80 lb in |
Thermostat Housing Bolt (4.3L) | 25 N·m | 18 lb ft |
Thermostat Housing Bolt (4.8L, 5.3L, and 6.0L) | 15 N·m | 11 lb ft |
Thermostat Housing Cover Bolt (6.6L) | 21 N·m | 16 lb ft |
Thermostat Housing Crossover Bolt (6.0L) | 21 N·m | 16 lb ft |
Transmission Control Module (TCM) Cover Bolt | 9 N·m | 80 lb in |
Transmission Control Module (TCM) Electrical Connector Bolt | 8 N·m | 71 lb in |
Turbocharger Coolant Bypass Valve (6.6L) | 60 N·m | 44 lb ft |
Turbocharger Coolant Feed Pipe Bracket Bolt (6.6L) | 21 N·m | 16 lb ft |
Turbocharger Coolant Feed Pipe Nut (6.6L) | 9 N·m | 80 lb in |
Turbocharger Coolant Inlet Banjo Bolt (6.6L) | 25 N·m | 18 lb ft |
Turbocharger Coolant Outlet Pipe Bolt/Nut (6.6L) | 9 N·m | 80 lb in |
Water Outlet Stud (4.3L Engine) | 25 N·m | 18 lb ft |
Water Outlet Tube Bolt (6.6L) | 21 N·m | 16 lb ft |
Water Pump Bolt (4.3L ) | 45 N·m | 33 lb ft |
Water Pump Bolt (6.6L ) | 21 N·m | 16 lb ft |
Water Pump Bolt (4.8L, 5.3L, and 6.0L) | ||
| 15 N·m | 11 lb ft |
| 30 N·m | 22 lb ft |
Water Pump Inlet Pipe Bolt (6.6L) | 21 N·m | 16 lb ft |
Wiring Harness Bracket to Thermostat Housing Bolt (6.6L) | 8 N·m | 71 lb in |