GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Engine 🢒 Engine Electrical 🢒 Auxiliary Generator Bracket Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Remove the fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement .
  2. Disconnect the auxiliary generator electrical connector.
  3. Remove the drive belt. Refer to Drive Belt Replacement .

    4. Object Number: 1369548 Size: SH
  4. Remove the positive battery cable from the auxiliary generator, perform the following:
    5. 4.1. Slide the boot (4) down to access the terminal stud.
    4.2. Remove the positive cable nut (1).
    4.3. Remove the positive cable.

    Object Number: 1369547 Size: SH
  5. Remove the auxiliary generator bolts (3).
  6. Remove the auxiliary generator (4).

    7. Object Number: 1369546 Size: SH
  7. Remove the auxiliary generator bracket bolts.
  8. Remove the auxiliary generator bracket.

Installation Procedure

    Object Number: 1369546 Size: SH
  1. Install the auxiliary generator bracket.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the auxiliary generator bracket bolts.

    3. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).


    Object Number: 1369547 Size: SH
  3. Install the auxiliary generator (4).
  4. Install the auxiliary generator bolts (3).

    5. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).


    Object Number: 1369548 Size: SH
  5. Install the positive cable to the auxiliary generator, perform the following:
    6. 5.1. Install the positive cable.
    5.2. Install the positive cable nut (1).

    Tighten
    Tighten the nut to 9 N·m (80 lb in).

    5.3. Slide the boot (4) up to cover the terminal stud.
  6. Install the drive belt. Refer to Drive Belt Replacement .
  7. Connect the auxiliary generator electrical connector (3).
  8. Install the radiator fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement .