Removal Procedure
- Drain the engine oil.
- Remove the oil filter.
- Remove the oil pan cover (434), bolts (435), and gasket (433).
- Discard the gasket.
- Remove the oil filter fittings (438), if equipped.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the oil pan cover (434), bolts (435), and NEW oil pan cover gasket (433).
Tighten
Tighten the oil pan cover bolts to 12 N·m (106 lb in).
- Install the oil filter fitting (438).
Tighten
Tighten the oil filter fitting to 55 N·m (40 lb ft).
- Install the oil filter.
- Refill the engine oil. Refer to
Approximate Fluid Capacities and/or
Fluid and Lubricant Recommendations.