Removal Procedure
- Drain the fuel from the filter assembly. Refer to
Water-in-Fuel Draining
.
- Disconnect the fuel lines from the filter assembly.
- Disconnect the electrical connectors.
- Remove the primary fuel from the bracket.
- Remove the primary filter-to-bracket bolts.
- Remove the primary filter assembly.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the primary filter assembly.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Connect the electrical connectors.
- Connect the fuel lines.
- Prime the fuel system. Refer to
Primary Fuel Filter Replacement
.
- Start the vehicle and inspect for leaks.