High Beam Indicator Inoperative. Chevrolet Express

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 High Beam Indicator Inoperative

Step	Action	Yes	No
Schematic Reference: Headlights/Daytime Running Lights (DRL) Schematics Connector End View Reference: Lighting Systems Connector End Views
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Turn the ignition switch to the RUN position. Turn the headlamp switch to the HEAD position. Place the multifunction headlamp dimmer switch to the high beams position. Do the high beam indicator function properly?	Go to Testing for Intermittent Conditions and Poor Connections	Go to Step 3
3	Do the high beam headlamps function properly?	Go to Step 4	Go to Symptoms - Lighting Systems
4	Using a scan tool, select IPC, Special Functions, and command the Lamp Test ON, then OFF. Does the high beam indicator lamp turn ON and OFF when commanded?	Go to Testing for Intermittent Conditions and Poor Connections	Go to Step 5
5	Inspect for poor connections at the harness connector of the instrument panel cluster (IPC). Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition?	Go to Step 7	Go to Step 6
6	Replace the IPC. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement?	Go to Step 7	--
7	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 3