For 1990-2009 cars only
Removal Procedure
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Disconnect the fuel lines at the cooler (1). Refer to Metal Collar Quick Connect Fitting Service .
- Remove the fuel cooler bolts (4, 6).
- Remove the fuel cooler (1).
Installation Procedure
- Install the fuel cooler (1) to the chassis and crossover.
- Install the fuel cooler bolts (4, 6).
- Connect the fuel lines at the fuel cooler (1). Refer to Metal Collar Quick Connect Fitting Service .
- Lower the vehicle.
- Prime the fuel system. Refer to Fuel System Priming .
- Start the engine. If the engine stalls, repeat the above step.
- Once the engine starts, inspect for fuel leaks.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolts to 18 N·m (13 lb ft).
