- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Inspect the front axle for leaks. Repair as necessary.
- Clean the area around the front axle fill plug.
- Remove the fill plug.
- Inspect the oil level.
Specification
The oil level should be between 0-10 mm (0-0.38 in) below the bottom of the fill plug opening.
- If the level is low, add oil until the level is even with the bottom of the edge of the fill plug opening. Use the proper fluid. Refer to
Fluid and Lubricant Recommendations
.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fill plug.
Tighten
Tighten the fill plug to 33 N·m (24 lb ft).
- Lower the vehicle.