Tools Required

J 45756 Rear Output Shaft Seal Installer

Notice: Refer to Transfer Case Seal Removal Notice in the Preface section.




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the rear propeller shaft. Refer to One-Piece Propeller Shaft Replacement.
3. Remove the rear output shaft seal by prying it out with a flat tipped screwdriver.

1. Using J 45756 , install a new rear output shaft seal.
2. Install the rear propeller shaft. Refer to One-Piece Propeller Shaft Replacement.
3. Check the fluid level. Add fluid, if necessary.
4. Lower the vehicle.