GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Wiper Motor Cover Replacement

Removal Procedure

    Object Number: 497992 Size: SH
  1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  3. Disconnect the electrical connector from the wiper motor.

    4. Object Number: 781418 Size: SH
  4. Remove the 3 screws (2) and the wiper motor cover (3) from the wiper motor (1).
  5. Remove the wiper motor cover (3).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 497995 Size: SH
  1. Install the wiper motor cover onto the wiper motor with the 3 screws.

    2. Tighten
    Tighten the screws to 3 N·m (26 lb in).


    Object Number: 497992 Size: SH
  2. Connect the electrical connector to the wiper motor.
  3. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  4. Install the wiper arms. Refer to Windshield Wiper Arm Replacement .
  5. Operate the wipers and inspect for proper operation.