GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Sliding Rear Side Door Trim Panel Replacement

Removal Procedure

    Object Number: 334040 Size: SH
  1. Remove the sliding side door inside door handle bezel. Refer to Rear Door Inside Handle Bezel Replacement.
  2. Remove the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement.
  3. Pull out on the sliding side door trim panel in order to disengage the retainers.
  4. Remove the sliding side door lower trim panel from the vehicle.

Installation Procedure

    Object Number: 334040 Size: SH
  1. Install the sliding side door trim panel by aligning the retainers on the panel to the slots in the door.

    2. Push the door panel towards the door to engage the retainers.

  2. Install the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement.
  3. Install the sliding side door inside door handle bezel. Refer to Rear Door Inside Handle Bezel Replacement.