GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 314793  Size: SH
  1. Remove the nuts (3) that retain the step pad extension to the bumper.
  2. Remove the step pad extension (2) from the bumper (4).

Installation Procedure


    Object Number: 314793  Size: SH
  1. Install the step pad extension (2) to the bumper (4).
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the step pad extension retaining nuts (3) to the bumper.
  4. Tighten
    Tighten the step pad extension nuts to 1.5 N·m (13 lb in).