GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Body Repair 🢒 Bumpers and Fascias 🢒 Front Bumper Impact Bar Bracket Replacement

Removal Procedure

    Object Number: 776152 Size: SH
  1. Remove the bolts that retain the bracket (2) to the bumper (1).
  2. Remove the bracket (2) from the bumper (1).

Installation Procedure

    Object Number: 776152 Size: SH
  1. Install the bracket (2) to the bumper (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts that retain the bracket (2) to the bumper (1).

    3. Tighten
    Tighten the bumper bracket retaining bolts to 25 N·m (18 lb ft).