GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Steering 🢒 Power Steering 🢒 Power Steering Fluid Reservoir Inlet Hose Replacement

Removal Procedure

    Notice: Refer to Power Steering Hose Disconnected Notice in the Preface section.


    Object Number: 407982 Size: SH
  1. Install a drain pan under the vehicle.
  2. Siphon the fluid from the reservoir to prevent excessive spillage.
  3. Remove the reservoir inlet hose (3) from the power brake booster (2). DO NOT reuse clamps.
  4. Remove the reservoir inlet hose (3) from the reservoir. DO NOT reuse clamps.
  5. Remove the reservoir inlet hose from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 407982 Size: SH
  1. Route the hose in the same position the hose occupied prior to removal.
  2. Install the reservoir inlet hose (3) to the reservoir. Reposition and secure clamps.
  3. Install the reservoir inlet hose (3) to the power brake booster (2). Reposition and secure clamps.
  4. Bleed the power steering system. Refer to Power Steering System Bleeding .
  5. Remove the drain pan from under the vehicle.