Fuel Injection Fuel Feed Front Pipe Replacement - Left Side for Chevrolet Express - AWD 2008

1. Remove the air conditioning (A/C) compressor. Refer to Air Conditioning Compressor Replacement .
2. If equipped, remove the auxiliary generator. Refer to Auxiliary Generator Replacement .



3. Disconnect the fuel feed pipe fitting from the fuel injector pump.
4. Disconnect the fuel feed pipe fitting from the left fuel rail.
5. Remove the left fuel feed pipe.

1. Install the left fuel feed pipe.

Notice: Refer to Fastener Notice in the Preface section.

2. Connect the fuel feed pipe fitting to the left fuel rail.

Tighten
Tighten the fittings to 41 N·m (30 lb ft).

3. Connect the fuel feed pipe fittings to the fuel injector pump.

Tighten
Tighten the fittings to 41 N·m (30 lb ft).

4. If equipped, install the auxiliary generator. Refer to Auxiliary Generator Replacement .
5. Install the A/C compressor. Refer to Air Conditioning Compressor Replacement .
6. Prime the fuel system. Refer to Fuel System Priming .
7. Start the engine.

If the engine does not start, repeat the above step.

8. Inspect the fuel system for leaks.