Sliding Door Outside Handle Replacement for Chevrolet Express - AWD 2008

1. Remove the sliding door lower trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement.
2. Remove the sliding side door control assembly. Refer to Door Control Replacement.
3. Remove the lock rods from the lock.
4. Remove the nuts and the bracket that retain the outside door handle to the sliding side door.
5. Remove the sliding side door outside handle from the door.

1. Install the sliding side door outside handle to the door.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the nuts and the bracket in order to retain the outside door handle to the sliding side door.

Tighten
Tighten the retaining nuts to 11 N·m (97 lb in).

3. Install the lock rods to the lock.
4. Install the sliding side door control assembly. Refer to Door Control Replacement.
5. Install the sliding side door lower trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement.