Discharge Hose Replacement for Chevrolet Express - AWD 2008

Discharge Hose Replacement 4.8L, 5.3L, 6.0L

Tools Required

J 39400-A Halogen Leak Detector

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
2. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement .
3. Remove the grille. Refer to Grille Replacement .
4. Remove the discharge line nut (2) from the condenser.
5. Remove the discharge line bolt from the compressor.
6. Remove the discharge line from the vehicle.

1. Install the discharge hose into the vehicle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the discharge hose nut (2) to the condenser.

Tighten
Tighten the nut to 16 N·m (12 lb ft).

3. Install the grille. Refer to Grille Replacement .
4. Install the discharge hose to the compressor.
5. Install the discharge hose to the compressor bolt.

Tighten
Tighten the bolt to 35 N·m (26 lb ft).

6. Install the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement .
7. Leak test the fittings of the component using the J 39400-A .