Windshield Defroster Duct Replacement for Chevrolet Express - AWD 2008
Removal Procedure
- Remove the engine cover. Refer to
Engine Cover Replacement.
- Remove the I/P carrier. Refer to
Instrument Panel Carrier Replacement.
- Remove the windshield defrost duct retaining screws at the heater case.
- Remove the windshield defrost duct retaining nuts at the cowl.
- Remove the windshield defrost duct (5) from the vehicle.
Installation Procedure
- Install the windshield defrost duct (5) to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the windshield defrost duct retaining nuts to the cowl.
Tighten
Tighten the nuts to 4 N·m (35 lb in).
- Install the windshield defrost duct retaining screws to the heater case.
Tighten
Tighten the screws to 4 N·m (35 lb in).
- Install the I/P carrier. Refer to
Instrument Panel Carrier Replacement.
- Install the engine cover. Refer to
Engine Cover Replacement.