GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
Express - AWD
🢒
Engine
🢒
Engine Cooling
🢒 Glow Plug Replacement - Bank 2
Removal Procedure
Remove the engine cover. Refer to
Engine Cover Replacement
.
Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
If necessary, remove the right front wheel and tire. Refer to
Tire and Wheel Removal and Installation
.
Remove the wheelhouse splash shield. Refer to
Wheelhouse Splash Shield Replacement
.
Remove the glow plug harness nut(s).
Remove the harness from the glow plug(s).
Remove the glow plug(s).
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the glow plug(s) and tighten to
18 N·m (13 lb ft)
.
Install the harness to the glow plug(s).
Install the glow plug harness nut(s) and tighten to
1.7 N·m (15 lb in)
.
Install the right front wheel and tire. Refer to
Tire and Wheel Removal and Installation
.
Install the wheelhouse splash shield. Refer to
Wheelhouse Splash Shield Replacement
.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
Install the engine cover. Refer to
Engine Cover Replacement
.