Grille Replacement Base
Removal Procedure
- Remove the park/turn signal lamp. Refer to
Parking and Turn Signal Lamp Replacement.
- Remove the bolts (1,3) that retain the radiator grille (2) to the radiator support.
- Remove the retainers at the top of the radiator grille from the radiator support.
- Pull the grille outward in order to release the lower retainers.
- Remove the radiator grille (1) from the vehicle.
Installation Procedure
- Position the radiator grille (1) to the vehicle.
- Align the lower grille assembly retainers.
- Push inward in order to secure the lower grille.
- Align the locating pin and the retainers at the top of the radiator grille (2) with the slots in the radiator support.
Press the retainers into place.
Caution: Refer to Fastener Caution in the Preface section.
- Install the bolts (1,3) that retain the radiator grille (2) to the radiator support and tighten to
1 N·m (9 lb in).
- Install the park/turn signal lamp. Refer to
Parking and Turn Signal Lamp Replacement.
Grille Replacement Uplevel
Removal Procedure
- Remove the park/turn signal lamp. Refer to
Parking and Turn Signal Lamp Replacement.
- Remove the bolts (2) that retain the radiator grille (1) to the radiator support.
- Remove the retainers at the top of the radiator grille (1) from the radiator support.
- Remove the radiator grille (1) from the vehicle.
Installation Procedure
- Install the radiator grille (1) to the vehicle.
- Align the locating pin and the retainers at the top of the radiator grille (1) with the slots in the radiator support.
Press the retainers into place.
Caution: Refer to Fastener Caution in the Preface section.
- Install the bolts (2) that retain the radiator grille (1) to the radiator support and tighten to
1 N·m (9 lb in).
- Install the park/turn signal lamp. Refer to
Parking and Turn Signal Lamp Replacement.