GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1987654  Size: SH
  1. Remove the accessory belt. Refer to Drive Belt Replacement - Accessory.
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement.
  3. Cut the belt (1) from the air conditioning (A/C) and crankshaft pulleys.

Installation Procedure


    Object Number: 2181051  Size: SH
  1. Position the belt behind the rear face of the balancer and around the A/C pulley.

  2. Object Number: 2181053  Size: SH
  3. Install the belt installation tool onto the balancer.

  4. Object Number: 2181055  Size: SH
  5. Slowly rotate the crankshaft pulley in a counterclockwise direction 180 degrees while using finger pressure to pull the belt forward. Ensure the ribbed area of the belt remains facing forward and the belt aligns properly to the A/C pulley.

  6. Object Number: 2181050  Size: SH

    Note: As the balancer is rotated clockwise, the belt installation tool will release from the belt.

  7. After installation of the belt, rotate the balancer clockwise 360 degrees.

  8. Object Number: 1987679  Size: SH
  9. Inspect the drive belt for proper installation and alignment.
  10. Install the skid plate. Refer to Engine Protection Shield Replacement.
  11. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory.