1. Remove the lower oil pan. Refer to Lower Oil Pan Replacement.
2. Remove the oil level sensor clip (3).
3. Remove the oil level sensor bolt (2) and sensor (1).

Note: When routing the oil level sensor wire, ensure that the wire is routed along the side of the oil pan.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the oil level sensor (1) and bolt (2) and tighten to 9 N·m (80 lb in).
2. Install the oil level sensor clip (3).
3. Install the lower oil pan. Refer to Lower Oil Pan Replacement.