Preliminary Procedure

1. Remove the uplevel radiator grille assembly. Refer to Grille Replacement
2. Aim the headlamps after the headlamp assembly has been replaced. Refer to Headlamp Aiming.

1

Headlamp Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Headlamp Radiator Support Nut (Qty: 2)

3

Forward Lamp Harness Electrical Connector (Qty: 2)

4

Headlamp Assembly

Warning: Refer to Halogen Bulb Warning in the Preface section.

Tip
Transfer the headlamp bulb sockets as needed.