Review the system and operation in order to familiarize yourself with the system functions. Refer to Rear Drive Axle Description and Operation .
Rear Axle Noise
The proper diagnosis is an important part of rear axle repair. In axle work, one of the most difficult conditions to diagnose is noise. Locating a broken axle shaft or broken differential gear presents little or no problems, but locating and isolating axle noise can be an entirely different matter.
Any gear driven unit, especially an automotive drive axle where the engine torque multiplication occurs at a 90 degree turn in the driveline, produces a certain amount of noise. Therefore, an interpretation must be made for each vehicle in order to determine where the noise is normal or if a problem actually exists. A certain amount of noise must be expected and cannot be eliminated by conventional repairs or adjustment.
Normal axle noise can be described as a slight noise heard only at a certain speed or under unusual or remote conditions. For example, the noise tends to reach a peak at speeds from 60-100 km/h (40-60 mph) depending on road and load conditions, or on gear ratio and tire size. This slight noise is in no way indicative of trouble in the axle assembly.
Driveline noises may confuse even the best technician. Vehicle noises coming from tires, transmission, propeller shaft, universal joints, and front or rear wheel bearings are often mistaken for axle noise.
Visual/Physical Inspection
| • | Inspect the system for loose or missing fasteners. |
| • | Inspect the system for leaking components. |
| • | Inspect the system for obvious damage or conditions which may cause the symptom. |
Symptom List
Refer to a system diagnostic procedure from the following list in order to diagnose the symptom:
