Removal Procedure
- Remove the screws holding the retaining ring to the headlamp housing assembly.
- Remove the retaining ring from the position lamp.
- Remove the headlamp capsule (1) from the position lamp.
- Remove the bulb (4) and socket from the rubber grommet in the lamp capsule.
- Push in on the side of the bulb (4) and turn the bulb 1/4 turn counterclockwise.
- Remove the bulb (4) from the socket.
Installation Procedure
- Install the bulb (4) to the socket.
- Push in on the bulb (4) and turn 1/4 turn clockwise.
- Install the bulb (4) and socket into the rubber grommet in the headlamp capsule (1).
- Install the headlamp capsule (1) to the headlamp housing.
- Install the retaining ring to the headlamp housing assembly.
Caution: Refer to Fastener Caution in the Preface section.
- Install the screws to the retaining ring to the headlamp housing assembly and tighten to
1.5 N·m (13 lb in).