Removal Procedure
- Remove the screws the lens to the lamp assembly.
- Remove the lens from the lamp assembly.
- Gently push in on the bulb and turn the bulb 1/4 turn counterclockwise.
- Remove the bulb from the socket.
Installation Procedure
- Install the bulb to the socket.
- Gently push in on the bulb and turn the bulb 1/4 turn clockwise.
- Install the lens to the lamp assembly.
Caution: Refer to Fastener Caution in the Preface section.
- Install the screws in order to retain the lens to the lamp assembly and tighten to
1.5 N·m (13 lb in).