Special Tools
• | J 22269-01 Accumulator and Servo Piston Remover |
• | J 29714-A Servo Cover Depressor |
- Inspect the 4th apply piston (25), the 2-4 servo cover (28), the 2nd apply piston (17), and the servo piston inner housing (20) for the following conditions:
- Install the following seals:
• | The 4th apply piston outer oil seal ring (26) on the 4th apply piston (25). |
• | The 2-4 servo cover O-ring seal (27) on the 2-4 servo cover (28). |
• | The 2nd apply piston outer (18) and inner (19) oil seal rings on the 2nd apply piston (17). |
• | The O-ring seal (21) on the servo piston inner housing (20). |
- Install the servo cushion outer spring (16), the servo cushion inner spring (105) (model dependent) and the cushion spring retainer (15) in the 2nd apply piston (17).
- Use the
J 22269-01 piston remover
and compress the second apply piston assembly (17).
- Install the second apply piston retaining ring (14).
- Assemble the 2-4 servo components in the order shown: (12-15, 17, 20, 22-25, 28, 29).
- Install the 2-4 servo assembly into the 2-4 servo bore.
- Install the
J 29714-A cover depressor
.
- Tighten the bolt on the
J 29714-A cover depressor
in order to compress the servo cover.
- Install the servo cover retaining ring (29).