GM Service Manual Online
For 1990-2009 cars only

Special Tools

    • J 8001 Dial Indicator Set
    • J 26900-13 Magnetic Indicator Base

For equivalent regional tools, refer to Special Tools.


    Object Number: 31080  Size: SH

    Note: The turbine shaft (502) is required in order to perform the forward clutch piston travel check.

  1. Remove the overdrive carrier retainer ring (522).
  2. Remove the turbine shaft (502).

  3. Object Number: 31081  Size: SH
  4. Place the turbine shaft (502) in a soft-jawed vice.
  5. Install the forward clutch housing assembly (602) onto the turbine shaft (502).
  6. Attach the J 8001-3 dial indicator to the J 26900-13 magnetic indicator base .
  7. Place an index finger over one side of the forward clutch fluid passage in the turbine shaft (502).
  8. Apply air to the other side of the forward clutch fluid passage in the turbine shaft (502). The piston travel should be 1.27-4.369 mm (0.050-0.172 in).
  9. Remove the tools.
  10. Remove the forward clutch housing assembly (602) from the turbine shaft (502).