Note: Removal of the fourth clutch backing plate retainer ring, the fourth clutch backing plate, and the fourth clutch plates will ease assembly of the overrun clutch housing assembly.
- Remove the fourth clutch backing plate retainer ring (523) from the fourth clutch housing (529).
- Remove the fourth clutch backing plate (524).
- Remove the clutch plates (525, 526).
- Install the fourth clutch housing (529) into the transmission case assembly.
- Install a new fourth clutch housing bolt (26).
Caution: Refer to Fastener Caution in the Preface section.
Note: Do not over torque the fourth clutch housing bolt (26).
- Tighten the fourth clutch housing bolt (26). Tighten the bolt to
23-26 N·m (17-19 lb ft).