Special Tools

For equivalent regional tools, refer to Special Tools.

1. Install the prop shaft front slip yoke oil seal assembly (20) (model dependent) with the J 38869 rear extension seal installer or the J 38694 seal installer (for fixed yoke applications). Apply J 36850 lubricant or equivalent to the spring pocket of the seal.



2. Install the transmission output shaft yoke seal sleeve (682) and the output shaft seal (683) (for some models).
3. Install the output shaft seal (675) (for some models).
4. Install the bearing spacer (18), case extension ball bearing assembly (17) and the bearing retainer ring (16) (for some models).
5. Install the case extension seal (15) onto the case extension assembly (19).
6. Install the case extension assembly (19) onto the transmission case.

Caution: Refer to Fastener Caution in the Preface section.

7. Install the case extension bolts (21). Tighten the bolts to 34 N·m (25 lb ft).