Preliminary Procedure

1. Open the rear access doors.
2. Remove the rear back body opening side applique. Refer to Back Body Opening Side Applique and Tail Lamp Replacement.

1

Back Body Opening Upper Applique Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Back Body Opening Upper Applique Nut (Qty: 4)

Tighten
6 N·m (53 lb in)

3

High Mounted Stop Lamp Electrical Harness and Grommet

Tip
Disconnect the harness grommet from the body then disconnect the electrical connector.

4

Back Body Opening Upper Applique

Tip
Transfer the high mounted stop lamp. Refer to High Mount Stop Lamp Replacement.