For 1990-2009 cars only
Removal Procedure
- Remove the screws (2) retaining the applique (3) to the filler panel.
- Pull the applique (3) away from the filler panel in order to release the retainer (1).
- Remove the applique (3) from the vehicle.
Installation Procedure
- Install the applique (3) to the vehicle.
- Install the retainer (1) into the slot in the filler panel. Press the retainer into place.
- Install the screws (2) in order to retain the applique (3) to the upper fender filler panel and tighten to 2 N·m (18 lb in).
Caution: Refer to Fastener Caution in the Preface section.
