GM Service Manual Online
For 1990-2009 cars only

Rear Side 60/40 Door Trim Panel Replacement - Left Side E26, 40 Door

Special Tools

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure


    Object Number: 887165  Size: SH
  1. Remove the side door pull handle screws (3).
  2. Remove the side door pull handle (2).
  3. Use the J 38778 to disengage the retainers around the outside edges of the lower portion of the door trim panel (1).
  4. Carefully pull the door trim panel (1) out of the retainers around the window opening.
  5. A long flat bladed tool may be necessary to aid in releasing the door trim panel (1) from the window opening retainers.

  6. Remove the front door panel (1) from the vehicle.

Installation Procedure


    Object Number: 887165  Size: SH
  1. Install the door trim panel (1) to the door by performing the following:
  2. • Align the door trim panel (1) to the retainers in the window opening.
    • Push towards the door to engage the retainers.
    • Align the retainers on the edges of the lower portion of the door trim (1).
    • Push towards the door to engage the retainers.

    Caution: Refer to Fastener Caution in the Preface section.

  3. Install the pull handle (2) and screws (2) and tighten to 1.9 N·m (17 lb in).

Rear Side 60/40 Door Trim Panel Replacement - Left Side E26, 60 Door

Special Tools

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure


    Object Number: 879678  Size: SH
  1. Remove the rear side door trim plate. Refer to Rear Door Trim Plate Replacement.
  2. Remove the armrest (3). Refer to Armrest Replacement.
  3. Remove the door trim panel screws (2), located behind the armrest.
  4. Use the J 38778 to disengage the retainers around the outside edges of the door trim panel (1).
  5. Slide the door trim panel  (1) upwards to release the door panel from the door.
  6. Remove the rear side door panel (1) from the vehicle.

Installation Procedure


    Object Number: 879678  Size: SH
  1. Install the rear side door trim panel (1), by hooking the top of the door trim panel (1) to the door belt line.
  2. Align the door trim panel retainers to the door.
  3. Push towards the door to engage the retainers to the sheet metal.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the door trim panel screws (2) and tighten to 2.0 N·m (18 lb in).
  6. Install the armrest (3). Refer to Armrest Replacement.
  7. Install the rear side door trim plate. Refer to Front Door Trim Plate Replacement.