GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Express - AWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Body Rear Corner Garnish Molding Replacement

Removal Procedure

    Object Number: 885207 Size: SH
  1. Remove the rear passenger seats when needed. Refer to Rear Bench Seat Replacement .
  2. Remove the passenger side rear corner trim panel, for the passenger side of the vehicle only. Refer to Body Rear Corner Trim Panel Replacement - Right Side .
  3. Pull down on the upper corners of the garnish molding (1) in order to disengage the retaining clips.
  4. Pull in order to disengage the remaining retaining clips.
  5. Remove the rear corner garnish molding (1) from the vehicle.
  6. Inspect the rear corner garnish molding (1) for broken or missing clips. Replace the clips as needed.

Installation Procedure

    Object Number: 885207 Size: SH
  1. Install the rear corner garnish molding (1) to the vehicle.
  2. Press on the rear corner garnish molding (1) in order to engage the clips.
  3. Install the passenger side rear corner trim panel (1), for the passenger side of the vehicle only. Refer to Body Rear Corner Trim Panel Replacement - Right Side .
  4. Install the rear passenger seats as needed. Refer to Rear Bench Seat Replacement .