GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Express - AWD 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Rear Side Door Upper Roller Bracket Replacement

Removal Procedure
  1. Remove the sliding side door upper roller bracket cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement.
  2. Remove the sliding side door upper track garnish molding. Refer to Rear Side Door Upper Track Garnish Molding Replacement.
  3. Remove the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement.

    4. Object Number: 334049 Size: SH
  4. Remove the bolts that retain the upper roller bracket to the door.
  5. Remove the sliding side door upper roller bracket from the rear of the upper track.
  6. Remove the sliding side door upper roller bracket from the vehicle.

Installation Procedure

    Object Number: 334049 Size: SH
  1. Install the sliding door upper roller bracket to the vehicle.
  2. Install the sliding door upper roller bracket to the rear of the upper track.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the bolts that retain the upper roller bracket to the door and tighten to 25 N·m (18 lb ft).
  4. Install the sliding side door upper track garnish molding. Refer to Rear Side Door Upper Track Garnish Molding Replacement.
  5. Install the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement.
  6. Install the sliding side door upper roller bracket cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement.