GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Express - AWD 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Rear Side Door Center Track Bumper Replacement

Removal Procedure

    Object Number: 334046 Size: SH
  1. Remove the passenger side body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side.
  2. Remove the nut that retains the sliding door stop to the body.
  3. Remove the sliding door stop from the vehicle.

Installation Procedure

    Object Number: 334046 Size: SH
  1. Install the sliding door stop to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the nut in order to retain the sliding stop to the body and tighten to 25 N·m (18 lb ft).
  3. Install the passenger side body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side.