Steering Column Tilt Head Housing Replacement. Chevrolet Express

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Express - AWD 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Column Tilt Head Housing Replacement

Callout	Component Name
Preliminary Procedures Remove the steering column tilt spring. Refer to Steering Column Tilt Spring Replacement. Remove the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement.
1	Steering Column Pivot Pin (Qty: 2) Procedure Use remover J 21854-01 to remove the steering column pivot pins. Before installing, lubricate the steering column pivot pins with the GM recommended lubricant. Once installed, stake the steering column in 3 locations around each steering column pivot pin. Special Tools J 21854-01 Pivot Pin Remover
2	Steering Column Tilt Head Procedure Transfer the turn signal switch bracket if needed. Tip Do not allow any debris into the steering column tilt head.

Callout

Component Name

Remove the steering column tilt spring. Refer to Steering Column Tilt Spring Replacement.
Remove the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement.

Steering Column Pivot Pin (Qty: 2)

Use remover J 21854-01 to remove the steering column pivot pins.
Before installing, lubricate the steering column pivot pins with the GM recommended lubricant.
Once installed, stake the steering column in 3 locations around each steering column pivot pin.

J 21854-01 Pivot Pin Remover

Steering Column Tilt Head

Transfer the turn signal switch bracket if needed.

Tip
Do not allow any debris into the steering column tilt head.