GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the coolant reservoir. Refer to Coolant Recovery Reservoir Replacement.

  2. Object Number: 924796  Size: SH
  3. Disconnect the blower motor electrical connector (2).
  4. Remove the blower motor cooling tube (3).
  5. Remove the blower motor retaining screws (1).
  6. Remove the blower motor.

  7. Object Number: 301650  Size: SH
  8. Remove the retaining clip from the fan cage (2).
  9. Remove the fan cage (2) from the blower motor (3).

Installation Procedure


    Object Number: 301650  Size: SH
  1. Install the fan cage (2) to the blower motor (3).
  2. Install the retaining clip to the fan cage (2).
  3. Install the blower motor.
  4. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 924796  Size: SH
  5. Install the blower motor retaining screws (1) and tighten to 2 N·m (18 lb in).
  6. Install the blower motor cooling tube (3).
  7. Connect the blower motor electrical connector (2).
  8. Install the coolant reservoir. Refer to Coolant Recovery Reservoir Replacement.