GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the left rear quarter trim panels. Refer to Body Side Trim Panel Replacement - Left Side.

  2. Object Number: 301708  Size: SH
  3. Disconnect the electrical connector from the blower motor resistor.
  4. Remove the retaining screws.
  5. Remove the blower motor resistor from the blower case.

Installation Procedure


    Object Number: 301708  Size: SH
  1. Install the blower motor resistor into the blower case.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the retaining screws to the blower case and tighten to 2 N·m (18 lb in).
  4. Connect the electrical connector to the blower motor resistor.
  5. Install the left rear quarter trim panels. Refer to Body Side Trim Panel Replacement - Left Side.