Removal Procedure
- Remove the primary battery tray. Refer to
Battery Tray Replacement.
- Disconnect the vacuum hose from the vacuum tank.
- Remove the screws (1) from the vacuum tank retainers.
- Remove the vacuum tank (3) from the battery tray.
Installation Procedure
- Install the vacuum tank (3).
Caution: Refer to Fastener Caution in the Preface section.
- Install the screws (1) to the vacuum tank retainers and tighten to
6 N·m (53 lb in).
- Connect the vacuum hose.
- Install the primary battery tray. Refer to
Battery Tray Replacement.