Removal Procedure
- Rotate the instrument panel (I/P) carrier out and downward. Refer to
Instrument Panel Carrier Replacement
.
- Disconnect the vacuum hose from the upper mode actuator.
- Release the tabs from the upper mode actuator.
- Unhook the actuator from the upper mode door lever.
- Remove the upper mode actuator.
Installation Procedure
- Hook the upper mode door actuator to the mode door lever.
- Install the upper mode actuator.
- Press upper mode actuator on until you hear tabs engage.
- Connect the vacuum line to the upper mode door actuator.
- Reposition and install the I/P carrier. Refer to
Instrument Panel Carrier Replacement
.