Removal Procedure
- Lift the buckle cover.
- Remove the seat belt buckle retaining bolt from the seat.
- Disconnect the electrical connector from the seat belt buckle, if equipped.
- Remove the seat belt buckle from the seat.
Installation Procedure
- Install the seat belt buckle to the seat.
- Connect the electrical connector to the seat belt buckle, if equipped.
- Lift the buckle cover.
Caution: Refer to Fastener Caution in the Preface section.
- Install the seat belt buckle retaining bolt to the seat and tighten to
52 N·m (38 lb ft).