GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Express - AWD 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Air Conditioning Compressor Belt Replacement

Removal Procedure

    Object Number: 1987654 Size: SH
  1. Remove the accessory belt. Refer to Drive Belt Replacement - Accessory.
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement.
  3. Cut the belt (1) from the air conditioning (A/C) and crankshaft pulleys.

Installation Procedure

    Object Number: 2181051 Size: SH
  1. Position the belt behind the rear face of the balancer and around the A/C pulley.

    2. Object Number: 2181053 Size: SH
  2. Install the belt installation tool onto the balancer.

    3. Object Number: 2181055 Size: SH
  3. Slowly rotate the crankshaft pulley in a counterclockwise direction 180 degrees while using finger pressure to pull the belt forward. Ensure the ribbed area of the belt remains facing forward and the belt aligns properly to the A/C pulley.

    4. Object Number: 2181050 Size: SH

    Note: As the balancer is rotated clockwise, the belt installation tool will release from the belt.

  4. After installation of the belt, rotate the balancer clockwise 360 degrees.

    5. Object Number: 1987679 Size: SH
  5. Inspect the drive belt for proper installation and alignment.
  6. Install the skid plate. Refer to Engine Protection Shield Replacement.
  7. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory.