For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
- Clean the area around the front axle fill plug and the drain plug.
- Remove the fill plug.
- Remove the drain plug.
- Drain the fluid from the front differential carrier assembly.
Installation Procedure
- Install the drain plug and tighten to 33 N·m (24 lb ft).
- Fill the differential carrier assembly with axle lubricant. Use the proper fluid. Refer to Approximate Fluid Capacities and Fluid and Lubricant Recommendations.
- Install the fill plug and tighten to 33 N·m (24 lb ft).
- Lower the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
