GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Express - AWD 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Hood Replacement

Removal Procedure
  1. Place protective covering over adjacent body panels.
  2. Remove the wiper arms from the vehicle. Refer to Windshield Wiper Arm Replacement.

    3. Object Number: 314927 Size: SH
  3. Open and support the hood.
  4. Remove the underhood lamp and the harness from the hood. Refer to Underhood Lamp Replacement.
  5. Remove the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement.
  6. Remove the pivot bolts (4) and the nuts (2) from the hinge (1).
  7. With an assistant, remove the hood from the vehicle.

Installation Procedure

    Object Number: 314927 Size: SH
  1. With an assistant, install the hood to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the hinge pivot bolt (4) and nuts (2) to the hinge (1) and tighten to 25 N·m (18 lb ft).
  3. Install the underhood lamp and the harness to the hood. Refer to Underhood Lamp Replacement.
  4. Install air inlet grille panels. Refer to Air Inlet Grille Panel Replacement.
  5. Install the wiper arms to the vehicle. Refer to Windshield Wiper Arm Replacement.