GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
Express - AWD
🢒
General Information
🢒
General Information
🢒 Exhaust Pipe Replacement - Left Side
Exhaust Pipe Replacement - Left Side 6.6L (LMM)
Removal Procedure
Remove the engine cover. Refer to
Engine Cover Replacement
.
Remove the left exhaust pipe heat shield bolts (1).
Remove the heat shield.
Remove the exhaust pipe bolts in the proper sequence.
Remove the exhaust pipe and gaskets.
Discard the gaskets.
Installation Procedure
Position the exhaust pipe with a NEW gasket to the turbocharger. Align the tab on the gasket at the turbocharger to face inward.
Loosely install the bolts.
Position the exhaust pipe with a NEW gasket to the exhaust manifold. Align the tab on the gasket to face outward.
Loosely install the bolts.
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten the exhaust pipe bolts in the sequence shown to
53 N·m (39 lb ft)
.
Position the heat shield to the exhaust pipe.
Install the exhaust pipe heat shield bolts (1) and tighten to
8 N·m (71 lb in)
.
Install the engine cover. Refer to
Engine Cover Replacement
.